
Audiotrix C2, C4 & C8
Choose 2, 4 or 8 FXS ports for analog phones and small sites.
- Selection criterion
- Exact firmware and a real-world T.38 test when fax is required.
Validate compatible elevator and emergency phones, signaling, power, failover and monitoring before POTS migration.
A starting point for your project. Review the model data sheet before ordering.

Choose 2, 4 or 8 FXS ports for analog phones and small sites.

Connect two analog endpoints to an IP voice service.

A compact gateway for a small analog or mixed-interface installation.

Bring multiple analog extensions onto an IP network.
Every device and service is part of a live operating workflow. The diagram makes the translation point, trust boundary and acceptance target visible.
Local endpoints, gateways, notification devices and an on-site call server can communicate on the private network. Local survivability must be designed and tested for the actual site.
A completed emergency call still requires the approved external route, correct location information and service-provider availability. Local operation alone does not provide public emergency reachability.
Auto-dials a programmed destination and may depend on line voltage and answer supervision.
Requires clear location identity, reachability and an approved response workflow.
Loop length, condition and power design affect the field result.
Presents the correct analog or digital interface, then converts validated traffic to SIP.
Controls extensions and internal routing on the private network. It may remain fully on-premises.
Terminates external calls and determines supported fax or modem behavior.
Receives calls, applies the dial plan and connects users or workflows.
Use-case model — field validation remains mandatory for endpoints, carriers and safety-related workflows.
A elevators & emergency phones design should answer each question before rollout, not after the first incident.
Safety, emergency, alarm and regulated services require approval from the responsible authority and service provider for the actual deployment.| Validation layer | Question to answer | Evidence to collect | Owner |
|---|---|---|---|
| Endpoint | Does the real device behave correctly over the new path? | Dialing, media and feature test | Customer / integrator |
| Network | Are latency, jitter, NAT and QoS controlled? | Capture and quality baseline | Network team |
| Service | Does the carrier support the required call or data behavior? | Carrier-accepted test result | Carrier / service owner |
| Failure | What happens during power, WAN or platform loss? | Failover and recovery test | Operations |
| Lifecycle | Who owns updates, certificates, backups and escalation? | Approved runbook and entitlement | Service owner |
Share the product, deployment and target outcome. M5 will identify the right technical and commercial path.