Modular telephony
Field-upgradable cards support up to 8 E1/T1 PRI ports or up to 28 BRI, FXS and FXO interfaces, depending on configuration.
A modular SBC and media gateway. S5 hardware supports up to 2,000 SBC sessions and 6,000 registered users; gateway capacity depends on the installed modules.

Sentinel 400 combines an SBC and a modular media gateway. The S5 hardware generation supports up to 2,000 SBC sessions and 6,000 registered users. Gateway capacity reaches up to 240 voice channels with the appropriate modules. Confirm hardware code, licenses and interface configuration when ordering.
The earlier S1 generation was documented at 600 SBC sessions and 2,000 registrations. The S1 end-of-life notice takes effect on 31 March 2027. S5 hardware requires DGW 48.3 or later; confirm the release required by the application. Registered users, sessions and gateway voice channels are separate limits.
Sentinel 400 is a modular multi-service platform combining session border control, media gateway functions and a virtualization server for medium and large enterprise voice environments.
Field-upgradable cards support up to 8 E1/T1 PRI ports or up to 28 BRI, FXS and FXO interfaces, depending on configuration.
Rule-based SBC routing, SIP normalization, TLS 1.3, SRTP, topology hiding and call admission control secure the voice edge.
The platform supports up to five virtual machines for approved third-party applications and operational consolidation.
Download the PDF files directly. Use the documentation portal for configuration guides, installation procedures and release-specific information.
A product decision is only correct when both sides of the interface, the security boundary and the operating model are considered together.
Local phones, a local IP PBX, Mediatrix gateways and Sentinel can exchange SIP calls entirely inside the organization. The voice path can remain on a private LAN, VLAN, campus network or isolated operational network.
An external connection is used only when calls must reach public numbers, remote sites or hosted services. If the required call path is entirely local, the system can stay on the private network.
Existing call control and dial plans remain on the trusted side.
Approved calls reach phones, agents and business applications.
Analog phones, fax, modems or PBXs can enter the SIP architecture without bypassing policy.
Modular SBC, media gateway and virtualization platform for larger hybrid estates.
Cloud users connect through a certified Direct Routing boundary.
Public numbers and inbound or outbound calling arrive from the service provider.
Conceptual architecture — final topology, capacity and interface configuration require validation.
Start with scale and deployment model, then validate interfaces, high availability, carrier interoperability and lifecycle requirements.
Published maximums are selection guides, not a substitute for sizing against codec, transcoding, recording, redundancy and traffic assumptions.| Selection factor | Sentinel Mini | Sentinel 100 | Sentinel 400 | Sentinel CS |
|---|---|---|---|---|
| Deployment | Compact appliance | 1U appliance | Modular 1U appliance | Virtual / cloud |
| Concurrent sessions | Up to 400 | Up to 120 | Up to 2,000 (S5) | Up to 20,000 |
| Registered users | Up to 1,200 | Up to 500 | Up to 6,000 | Up to 30,000 |
| Legacy voice | External gateway | Optional interfaces | Modular PRI / BRI / FXS / FXO | External gateway |
| Typical fit | Branches and focused edges | SMB and hybrid sites | Large hybrid voice environments | Centralized and cloud voice |
Share the product, deployment and target outcome. M5 will identify the right technical and commercial path.
A hybrid platform is useful when a site needs both SIP session control and connectivity to legacy telephony. Sentinel 400 combines SBC and media gateway capabilities. Match its ordered configuration to the interfaces you must retain and plan the cutover so existing and new services can be tested together.
| Criterion | Assessment |
|---|---|
| Physical interfaces | Inventory every analog and digital circuit and confirm the exact supported interface configuration. |
| SIP services | Define the PBX, carrier, numbering and media requirements on both sides of the border. |
| Migration | Pilot one representative site, document rollback and agree a production maintenance window. |
No. Sentinel 400 is a hybrid hardware platform; Sentinel CS is a virtual SBC. Choose according to your physical interface and hosting requirements.
A phased migration may be possible, subject to the PBX interfaces, SIP behavior and tested interoperability. Submit the model and software version for review.
Include your country, sites, SIP provider, existing equipment, capacity and timeframe. M5 can identify the interoperability questions, local requirements and evaluation steps to confirm.
Request an architecture reviewRead the reference documentation
Publisher: M5 Technologies (Media5 Corporation). This guide revised: